Electronic work-hours record: what Mexico's 40-hour law requires and how to get ready
What article 132, section XXXIV of Mexico's Federal Labor Law requires, the 48 to 40 hour schedule, overtime under the new limits, face-data privacy, and how Nori keeps the record next to payroll.
In this article
On 1 January 2027 Mexico's maximum work week drops from 48 to 46 hours, and that same day the labor ministry's rules on electronic time records take effect. If you track attendance today with a sheet everyone signs, or a fingerprint clock nobody checks, you have a few weeks to sort it out.
What the law says
The decree amending the Federal Labor Law (LFT) was published in the Diario Oficial on 1 May 2026 and took effect the same day. It added section XXXIV to article 132, the list of employer obligations. It says three things:
- Record each worker's hours electronically, including start and end times, and give that record to the authorities when they ask.
- The STPS will issue general rules on who this applies to and the exceptions.
- The content of the record is full proof if it can be shown that worker and employer agreed to it.
Not complying carries a fine of 250 to 5,000 UMA (article 994, section IV Bis). At the 2026 UMA that's roughly MXN 29,000 to MXN 586,000.
The fifth transitory article sets 1 January 2027 as the start date for the STPS rules. As of mid-November 2026 they hadn't appeared in the Diario Oficial, so nobody knows yet what format they want, whether anything goes up to a portal, or which companies are exempt. What's already in the law is enough to get ready.
The schedule from 48 to 40 hours
Article 59 already says 40 hours, but the second transitory article brings the limit down every 1 January. The daily limits stay the same: 8 hours for a day shift, 7 for a night shift and 7.5 for a mixed one.
The seventh transitory article says the reduction can't lower wages, salaries or benefits. Someone paid by the week earns the same working 46 hours.
Overtime under the new limits
This changed more than it seems. The new article 66 allows up to 12 hours of overtime a week, spread over no more than 4 hours a day and no more than 4 days, paid at double. Those 12 hours arrive in 2030; until then the fourth transitory article caps them at 9 in 2026 and 2027, 10 in 2028 and 11 in 2029.
Anything past that limit is paid at triple (article 68), but now with a cap: no more than 4 hours a week. And regular plus overtime hours can never exceed 12 in a day.
The old rule was 3 hours a day, 3 times a week. If your payroll or your spreadsheet still splits overtime that way, it needs changing.
To pay overtime right you need to know when each person came in and left each day, which is where the electronic record stops being paperwork. In a labor lawsuit the employer carries the burden of proving how long the workday was (article 784, section VIII). If you have nothing to prove it with, the worker's word counts.
What a record needs to show to be useful
The law asks for start and end times. For the record to hold up in an inspection or a lawsuit, you want to be able to see:
- Who clocked in. Each punch tied to one person, so a coworker can't sign for the one who showed up late.
- When and from where. Date and time from the server or the device, and the place if they clock in away from the branch.
- That nobody changed it. If a supervisor can edit a start time from their desk, the record is worth little.
- How it was corrected. People forget to clock in. The correction should sit apart, with its reason, who asked for it and who approved it, and the original punch still visible.
- The worker's agreement. That's what section XXXIV needs for the record to be full proof. An agreement signed or accepted by each person, with the date and the text they accepted.
The law doesn't spell these out in those words, and the STPS rules may ask for more or less. But it's the minimum for a judge to believe your system.
Paper, fingerprint clock or phone
A paper sheet is out: the law says electronic. It can stay as a backup, but it doesn't comply on its own.
A fingerprint or face clock on the wall is the usual choice in branches and plants. It works if it stores the data so it can't be altered and someone pulls it in time for payroll. Many only download over USB or into a program installed on one computer, and matching against absences and overtime is done by hand.
For sales reps, drivers or technicians who start the day on the road, the practical option is a phone with a geofence: the worker clocks in from their phone and the system checks they're inside the site's perimeter. For home or field work, saving the location is enough.
Many companies end up with both: a clock at the branch entrance and phones for the people who are out.
A face is delicate data
Mexico's 2025 Federal Law on the Protection of Personal Data Held by Private Parties (LFPDPPP) requires express written consent for sensitive data (article 8), and accepts a handwritten signature, an electronic signature or another authentication method. The law doesn't name biometric data in its list, but the former data protection authority's (INAI) guide on biometrics already said it can be sensitive depending on how it's used, and a face can't be reset like a password if it leaks.
In practice:
- Ask for face permission separately from the time-record agreement, and mention it in your privacy notice.
- Offer another way to clock in to anyone who declines, with no penalty.
- Let the worker withdraw permission, and delete their data when they do.
- Check where the photos go. Some clocks send every image to a service in another country to recognize it.
Getting ready before January
- Check each shift's schedule against 46 hours. An 8-hour shift Monday to Saturday adds up to 48 and no longer fits.
- Decide how each group will clock in: a clock at the branch, a phone, or both.
- Write the time-record agreement and collect each person's acceptance, with a date.
- If you'll use faces, prepare the consent and the privacy notice.
- Adjust how you calculate overtime: 9 double hours a week in 2027, at most 4 a day and 4 days, and triple for up to 4 more.
- Test the report: pull one person's hours for a month and ask yourself whether you could show it to an inspector.
When the STPS publishes its rules, the report format will most likely need adjusting. The agreement and the schedules can't be improvised in a week.
How Nori does it
In Nori the record lives under Human resources › Work-hours record, in the same database as payroll and branches.
How people clock in. The kiosk is a tablet or computer with a camera at the branch. The worker taps Clock in, Start break, End break or Clock out and looks at the camera; if it doesn't recognize them, it asks for their employee number and PIN. It doesn't take a Nori user or license. On the phone, each worker has a personal link: their location is saved and, if the site has a perimeter, they have to be inside it. Without internet, the punch is saved with the device's time and sent on its own when the signal comes back; Nori keeps both times.
The record can't be edited. A punch is never deleted or changed. If someone forgot to clock in, a correction is requested with its reason, someone else approves it and Nori adds a void or a new punch. The worker sees the decision on their link and says whether they agree. Each punch carries a seal that includes the previous one; the Integrity screen checks the chain and a backup is saved every night.
Agreement and face. The agreement is accepted from the link, in person or with a signed PDF, and the text version and date are kept. If someone clocks in without an agreement, the punch is saved but flagged. The face is optional and has its own consent: anyone who declines clocks in with a PIN, and if they withdraw permission Nori deletes their face data. Recognition runs on the device; Nori keeps a few encrypted numbers that describe the face, not the photo, and doesn't send them to any other company.
Overtime and payroll. Nori works out late arrivals, absences and overtime in 30-minute blocks, a supervisor approves them and they're split into double and triple. Each year's maximum week sits in Settings › Maximum week by date, and the board shows who is getting close to the limit. When you calculate payroll, absences and approved overtime come in as incidents without typing them again.
Report. The labor report comes out in PDF, Excel or CSV, with every punch, its channel and location, the calculated days and the corrections with their history. The official STPS format doesn't exist yet; when it does, the report gets adjusted.
What Nori doesn't do for you is write the agreement or decide how to lay out the shifts: that's your company's call, ideally with your labor lawyer. The 2027 schedules are worth settling soon. The rest of the module is on the time clock page.
Frequently asked questions
When does the electronic record become mandatory?
Section XXXIV of article 132 has been in the law since 1 May 2026, when the decree took effect. The STPS rules that set who it applies to and the exceptions take effect on 1 January 2027, under the fifth transitory article.
How much is the fine for not keeping the record?
Article 994, section IV Bis, sets 250 to 5,000 UMA. With the 2026 UMA (MXN 117.31 a day) that's roughly MXN 29,300 to MXN 586,550.
Does my fingerprint time clock count?
It can, if it stores each person's start and end times electronically and you can hand that data over. We still need the STPS rules to know what format and fields they want. A paper sign-in sheet doesn't qualify, because the law says electronic.
Can I require workers to clock in with their face?
A face is delicate personal data, and Mexico's data protection law (LFPDPPP) requires express written consent for sensitive data. The safe route is to ask for that permission separately from the agreement and offer another way to clock in, such as a PIN, to anyone who declines.
Does Nori's record sync to SAP Business One?
No. The record lives in Nori; SAP Business One has no time and attendance of its own. Absences and approved overtime go into Nori's payroll, which posts its own journal entry.